Photo-Chemical Reactors
for Batch & Flow

Specifications

• Light output spectrum (400-700 nm); variable light intensity (10-15000 lux)
• Visible light: Red, Blue, Green, Yellow, Cyan, White light etc
• Cage body: SS
• ID: 96mm & Height: 140mm
• Total length of light: 5 meters
• Wattage: up to 90 watts
• Blue light max = 440 nm | Green light max = 560 nm | Red light max = 635 nm
• VARIABLE DC POWER SUPPLY: 150W max output, Variable Current (0-5A), Voltage (0-30V)
• High resolution: 1mV/1mA | Low ripple/noise | Over voltage/current protection
• Multi-directional cooling with smart fan | 3.7-inch TFT LCD display
• Support RS232, SCPI and LabVIEW
• 5ML GLASS REACTOR SETUP + ELECTRODES SETUP (40mm×8mm×1mm, 13 Electrodes: Al, S Gr, H Gr, Ti, Brass, Pb, Zn, Cu, Ni Foam, Mg, Ni, Fe, SS316)

Specifications

• Light output spectrum (400-700 nm); variable light intensity (10-15000 lux)
• Visible light: White light
• Cage body: SS
• Total length of light: 5 meters | Wattage: up to 90 watts
• Fixed Power Supply

Specifications

• Cage body: SS | ID: 96mm & Height: 140mm
• Total length of light: 5 meters
• VARIABLE DC POWER SUPPLY: 150W max, Variable Current (0-5A), Voltage (0-30V)
• High resolution: 1mV/1mA | Low ripple/noise | Over voltage/current protection
• Multi-directional cooling with smart fan | 3.7-inch TFT LCD display
• Support RS232, SCPI and LabVIEW

Specifications

• MOC: SS 316 | Photo-chemical reactor for UV reactions | Type: Batch reactor
• SS protective big compartment for safety and stop light leaking
• Cooling Circulation: OD60mm×Height 300 mm | Capacity 5L chamber
• Temperature controlled in digital display: 10 °C to 100 °C
• 254nm Low Pressure Lamp (1Qty) | TUV 4 Watts & G4 T5
• Temperature Controller & Sensor | Power Cable | Power supply for 254 nm lamp
• Automatic power cut function for safety
• Three Neck Round Bottom Flask of Borosilicate 1L (1Qty)
• Quartz Condenser (1Qty) immersion wall for Coolant Circulation
• Accessories: Tube for Water Circulation, Brass Connection for Water Tank, Viton Oring, Nylon Holder for Quartz (Round)

Specifications

• MOC: SS 316 (Thickness +2mm)
• 500 mm X 650 mm X 650 mm; Photoreactor area
• Model: SCS-PFR-1L | Photo Reactor Dimension: Height 500 mm and Width 650 mm
• Light output spectrum (400-800 nm)
• Photo reactor: Red, Blue, Green, Yellow, Cyan, White light etc
• Total length of LED light: 150 meters x 1 cm in Double channel
• PFA Tubing OD = 6.35 mm and ID = 4mm
• Operating pressure: 10 BAR | Operating Temperature: RT ~40 Degree
• Design pressure: 30 BAR | Design Temperature: 60 Degree
• Flow rate: 0.01-100 mL/min
• Process safety controls and display parameters Fan with Regulator
• Control with Switches with Digital Display Sweep-300 mm; RPM–upto 1350; Power Inputs-60 W
• MCB Out-sided | Flow sensors and leak detection systems with Window for reactor leakage monitoring
• Control system interface: Main switch followed by LED control
• Inlet and outlet connections: 1/4 in PFA Connections with nut and ferrule fitting
• Automated BPR | Flowrate — 0.01 to 2 Liter/min LCD Display 16×2
• PTFE Diaphragm Based 1/8″ | Outer Body: SS 316 | Wetted Part: PTFE diaphragm
• Pressure: up to 20 Bar | Error ± 0.5 bar | Temperature: RT to 100°C
• Connector: 1/4″ (inlet and outlet)